Where's the switch for 16 or 20 bit A/D select?greenspun.com : LUSENET : Kurzweil Users : One Thread |
And where is that selection switch to go from 16 to 20 bits?>With KDFX installed it is selectable between 16 and 20bit. Without >KDFX it is 16bit. All internal > processing however is at a much higher bit depth using a >combination of fixed point and floating point > calculations. > > -- Mike Martin (K25Zone@aol.com), February 08, 1999.
-- Warren Glotzbach (wglotzba@paging.mot.com), February 09, 1999
I found something myself last night that might help clarify this issue. On page 3-21 of the KDFX User's Guide it states that the "DigOut" parameter at the bottom right hand corner of the EffectsMode page selects between 16-bit and 20-bit operation. Three paragraphs down from this says "Note that the switch does not affect any of the K2500's inputs: those are always operation in 16-bit mode."So it looks as if the A/D converters are always 16-bit.
-- Warren Glotzbach (wglotzba@paging.mot.com), February 10, 1999.