I was just curious if it was ok to wind/fire an m6 while loading film with the base plate off. Will it cause any harm to the camera? Should there be pressure on the take up spool? What is the proper way. Note. I usually feel the film to the take up spool and the click 2 frames, the replace the base plate.

Sorry if this topic has been discussed before. :)

thanks, Mac

-- mac (mac@mcsal.com), November 17, 2000

Answers

Copied from an earlier post:

I talked to the Leica technician at Kindermann Canada and he said it was hard on the wind release/counter mechanism. Not as bad as trying to do double exposures but not a good idea none the less.

The problem that some M cameras have is with the leading edge of the film getting caught on the edge of the camera's film gate. When you put the baseplate back on it jams the film between the film gate and the baseplate positioning disc. A roll of film comes with a kink in it right where it comes out of the magazine. When you are loading, flip open the back of the camera and make sure that the leading edge of the film is past the camera's film gate, place the film according to the diagram, button it up and there will be no misloads ever.

Some M cameras are more suseptible to having the film catch on the film gate than others. I have never been able to come up with a reasonable explanation for this. It helps if you slide the film magazine in first with the film going in on a slight angle (magazine low and the tip of film high). Once you practice this, it becomes very natural and quick to do.

Most people like to blame the take up spool for misloads but, if the film clears the gate, it is pushed into position by the baseplate's positioning wheel and always lines up correctly.

If you want absolutely fool proof loads so you can lend your camera to your deaf, blind and dumb friend, just get a ABLON film trimming template for the old screw mount cameras and trim the film leader. I sometimes do this if I am shooting a whack of film in a theater as I or my unsuspecting friend can load the cameras without openning the back at all. Too time consuming for regular shooting though.

Cheers

-- John Collier (jbcollier@home.com), November 17, 2000.