WE LOKING FOR SYSTEM FOR STICKING( SEWING OR WELDING) FOR ALUMINUM BAND(COIL) WE ANODAZE ALUMINUM COILS AND BEFORE IT WE USE TERMOSTICKER BUT IS NOT RELIABLE AND WE PASS BAND TROUGHT THE MACHINE WITH LOW SPEED AND WITHOUTH CURRENT WE LOKING FOR MORE FLEXIBILE SOLUTION.

SHARKOVA

-- vencislava sharcova (vsharkova@mobikom.com), February 21, 2001

Answers

Thank you for thinking of the T. J. Snow Co., Inc. We have many pieces of equipment that might be used for this purpose. Please check out our web page, and fill in the proposal request at the web site listed http://www.tjsnow.com/machines/rfq/TJS_NM_RFQ_checklist.doc. We need to ask questions such as:

„h Are you working towards commercial quality, automotive quality, or military quality? „h Specifications, samples and/or drawings of the part(s) you wish to weld. „h Whether you have any special machine specifications or requirements. „h What are your part clearance requirements. „h Your plant's incoming line voltage (220, 440, 550), (50, 60 Hz.), Single or Three Phase. „h Whether you need us to quote any special fixturing or tooling to use with these welders. „h How soon you need one or more of these welders in house.

Please excuse us for asking all these questions. This is what we normally ask customers over the phone when they call for a quote.

Quoting welders over the Internet has removed a level of personal involvement and service that we at T. J. Snow Company seek to offer our customers. In other words, we want to be very closely involved with your company in this welder selection process. Please take advantage of our 37 plus years of experience. We hope to have the pleasure of hearing from you again soon!

Bob Balla T. J. Snow Company, Inc. 6207 Provence Street Chattanooga, TN 37421

Phone: 423-894-6234 423-308-3161 (direct line) Fax: 423-892-3889 e-mail: bobballa@tjsnow.com

-- Bob Balla (bobballa@tjsnow.com), April 24, 2001.