We have just taken over a Kone TMS50 or Quattronic lift with heaps of floor levelling problems especially in the hotter weather. The inductors seem fine, it is a belt driven machine, any tips?

-- Warren McKenzie (wmck45@one.net.au), March 08, 2001

Answers

The tms 50 only has a few set ride profiles as in you go through them and leave it at the one that runs best also the prob we had with ours was that the drive sheave was wrong if you sheave is too big it will act irratic in leveling as in pre open wont work all the time check the specs if you have them for the sheave size required ..

good luck JAG

-- JAG (gipper066@yahoo.com), March 20, 2001.