When adjusting my M6TTL film speed dial, the arrow "click" will fall onto the first hash mark on either side of 100, 200, 400 etc film speeds. Do I set the arrow for these speeds between the click or does the dial need adjustment? Many thanks.

-- Jim Ford (fordhayes01@aol.com), August 13, 2001

Answers

i'm not sure but one way to check precisely how your unit is reading the film iso is by hooking up the leica sf-20 flash unit. when you press the shutter halfway, the flash unit will show on it's digital display what iso the camera is set to.

-- Tristan (tristan@tristantom.com), August 13, 2001.

Spin the dial all the way to left, and see if it falls before or after the ISO number - you'll then know which side of the hash mark to use.

-- Jack Flesher (jbflesher@msn.com), August 13, 2001.

Jack's method is the way I'd do it...if the camera was out of warranty. In warranty, it would be in Leica's lap post-haste.

-- Jay (infinitydt@aol.com), August 13, 2001.