Need some help with a twin post dmc-1 that fails with a "jack sensor error". All the sensors are working and the heads are in sync. How does this system work? Replaced the extension board with no luck.Would like to know how this system works and how to setup. Cliff

-- Cliff (cliff77@att.net), October 15, 2004

Answers

I HAVE SEEN THIS PROBLEM. I WOULD POSSIBLY CHECK TO SEE IF THE SCREEN IN THE ADJUSTOR FOR THE VALVE MY BE PLUGGED WITH DEBRIS. THIS SOMETIMES CAUSES FAULT THAT LOOKS LIKE A SENSOR PROBLEM.

-- TOM PRZYBYLA (PARTSPEC@FLASH.NET), October 19, 2004.